Sold out

Z Powerbar II – 110V


No Longer Offered for 2020: The Z Powerbar II uses (patented) parallel noise filtration circuits.Thirty-six parallel tuned filters operating over an Ultra Wide bandwidth, engineered to “attract and destroy” AC noise from incoming 110V, 50-60 Hz AC power sources. (Unlike series filters used by competitors, the Z Powerbar II will not limit current or dynamics!).

Product Line




Black Face, Silver Face


Sold as Single Item

SKU: POWERBARII-XX-XXX-XX-1 Category: Tags: , ,
MIT Cables Powerbar II

No Longer Offered for 2020: Z Powerbar II

Z Powerbar II—MIT introduces an all new “Audiophile Grade” energy distribution system with noise devouring filters plus dual switches to enable additional tuning of PFC (Power Factor Correction). As changing digital formats emerge with higher and higher sampling rates, clocking frequencies and data correction frequencies a litany of new pollution is rendering older filtration techniques useless to the modern Audiophile. This high frequency noise bothered MIT engineers enough to thoughtfully address this increasingly destructive problem: Dirty Power caused by noise insertion at higher and higher frequencies.

36fp filterpole logoBased on proven parallel noise filtration circuits The Z Powerbar II adds another 12 “filter poles” to increase efficiency from 24 to 36 poles over the original Powerbar. As you would expect, these additional parallel filters are strategically placed on bands that carry unwanted high frequency noise.

Power Factor can change over the period of the day. Also, your neighbors can inject noise into the power lines you share. Besides the additional filtration, the Z Powerbar II has two front mounted switches to adjust Power Factor to maximize efficiency.

New for 2018

Power Factor Correction logoWhen properly adjusted, the effect this device has on AC powering up each AV component is instantly realized by any good Hi Fi system and easily seen on any HD display. By controlling a broader spectrum of line noise you will experience “blacker” blacks, better saturation of tones and colors and a deepening sense of detail in the shadows. Timbre is natural and space between instruments is enhanced by the lack of this destructive noise. As compared to the Original Z Powerbar, the Z Powerbar II is key to enabling the retrieval of spatial information needed to enhance the sense of “being there” and the ability to deliver “clean power” to allow every device connected to reach its full potential.

PFC SwitchesIsolation is the latest feature included in the Z Powerbar II. This is achieved by new Hospital grade ISO duplexes and discreet internal wiring to eliminate a “daisy chain” that serves to minimize or eliminate “cross talk”. When audio devices create and insert their own noises, isolation is the answer.

MIT Cables Z Powerbar II USA back
  • Thirty-six parallel tuned filters operating over an Ultra Wide bandwidth, engineered to “attract and destroy” AC noise from incoming 110V, 50-60 Hz AC power sources. (Unlike series filters used by competitors, the Z Powerbar II will not limit current or dynamics!). You can plug power hungry amplifiers directly into the Powerbar II serving up to 1800 watts.
  • 1 Isolated Hospital Grade duplex (red): This pair of outlets are switched on at the back of the unit near the resettable fuse. Once in the “on” position, they remain “always hot” for devices with memory that must remain on when not in use.
  • 5 (Orange) duplexes are switched on by the power switch on the front of the Z PB II to power up the individual components. Each duplex is Isolated from others and features Hospital Grade clamping power needed for a solid grip to the blades on large gauge power cords. Will support more than 1.5 lbs at the plug.Power Factor .75 graph
  • Power Factor correction: Dual PFC switches to tune incoming AC power for maximum efficiency.
  • Surge and spike protection: for noise-free A/V performance and improved service life.
  • 15 amp 115V or 10 amp 230V breakers with resettable switch.
  • Excellent for silent AV power distribution near fluorescent lights and low voltage lighting.
  • Includes UL approved power cord (USA). Japan units include PSE approved power cord and PSE approved duplex outlets.

  • Power Factor Correction: Due to stored energy within the load and returned to the source, or due to a non-linear load that distorts the wave shape of the current drawn from the source, the apparent power will be greater than the real power.

    Tradeshows and Audio Expositions

    MIT Cables is often asked by High-End Audio Dealers and leading High-End Audio manufacturers to provide the supporting Speaker Interfaces, Interconnects, Power Conditioning and technology to “tie the individual components into a a complete system”. 

     MIT Cables approaches cabling to properly interface components to operate as a single unit, or “System”. A System approach creates a single voice from many different contributors, similar to an orchestra or chorus made up of many voices. Similar to tuning an orchestra to a single perfect pitch, properly interfaced components can become more than the sum of its parts. We celebrate with our exhibit partners and all that contributed to creating the sonic experience at each of our collective venues.

    The original Z-Powerbar and other Z-Filterpole AC Conditioning products are used in a multitude of professional environments; Used by Recording Professionals, Scoring and Sound Editing Engineers, and of course our family of High-End Audiophiles. 

    Axpona 2017

    Manuals, Infosheets, and Related Publications

    Powerbar II Infosheet
    Z Powerbar Infosheet
    Power Line Noise: How Series Filters Work
    Power-line Noise Filters: How they Work